P06478-B21 HPE ProLiant DL20 Gen10 E-2136 / 16GB-U / S100i 4SFF/ 1Gb 2-port 332i / 500W /3YW

Description:

• Server Series: ProLiant DL20 Gen10 P/N P17080-B21
• Brand: HPE
• Form Factor: Rack 1U
• Warranty: 3 years
• Processor:
• Processor: installed 1X E-2224 (4-core, 3.4 GHz, 8 MB, 71W)
• Number of CPU supported: 6
• Processor family: Intel® Xeon® E 2100 product family Intel® Core™ i3 Intel® Pentium®
• Number of Core: 4
• Base clock speed: 3.3 GHz
• Cache: 12 MB
• Thermal design power(TDP): 71W
• Memory:
• Memory Type: HPE Standard Memory
• Memory installed: 16 GB (1 x 16 GB) UDIMM
• Maximum memory: 64 GB
• Memory slots: 4 DIMM slots, maximum
• Memory protection features: ECC
• Graphic: Integrated Matrox G200 video standard, Video modes up to 1920 x 1200 @ 60 Hz (32 bpp), 16 MB Video Memory
• Storage:
• Optical Drive Type: none
• Storage Controller: HPE S100i
• Included hard drives: None ship standard
• Networking:
• Network controller: 1 Gb 332i Ethernet adapter: 2 ports
• Protocol: Ethernet
• Ports: 2 RJ45
• Interfaces:
  
• Serial: 1 port - Optiona
• Video: 1 Rear - VGA port (standard on all chassis types)
• Network Ports 2x 1GbE embedded NIC (standard on all chassis types)
• iLO Remote Mgmt Port: 1 Gb Dedicated - Optional
• USB 3.0: 5 USB ports (standard) Front: 1xUSB 3.0, 1xUSB iLO Service Port Rear: 2xUSB 3.0 Internal: 1x USB 3.0
• Power and Cooling:
  
• Fan: Includes 3 standard single rotor non-hot plug and non-redundant fans
• Power supply: HPE 500W Redundant Power Supply
• Software and Security:
  
• Management license: HPE iLO Advanced Licenses
• Operating system supported: Windows Server 2019,Windows Server 2016 (Most Recent Version),VMware vSphere 6.7, 6.5 U3 and 7.0, • Red Hat Enterprise Linux (RHEL) 8.0 and 7.6, • SUSE Linux Enterprise Server (SLES) 15 and 12 SP3, ClearOS/VM 7.5, CentOS
• Security: UEFI Secure Boot and Secure Start support, Immutable Silicon Root of Trust, FIPS 140-2 validation, Common Criteria certification, Configurable for PCI DSS compliance, Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on browser, Support for Commercial National Security Algorithms (CNSA), iLO Security Modes including a New iLO Advanced Premium Security License, Granular control over iLO interfaces, Smart card (PIV/CAC) and Kerberos based 2-factor Authentication, Tamper-free updates – components digitally signed and verified, Secure Recovery – recover critical firmware to known good state on detection of compromised FW, Ability to rollback firmware, Secure erase of NAND, TPM (Trusted Platform Module) 1.2 option, TPM (Trusted Platform Module) 2.0 option, Bezel Locking Kit, Chassis Intrusion detection option, Intel® Software Guard Extensions (Intel® SGX)
• Software RAID: "HPE Smart Array S100i SR Gen10 SW RAID "
• HPE Converged Infrastructure Management Software: HPE OneView Advanced (with HPE iLO Advanced) | HPE OneView Advanced (without HPE iLO Advanced)
• Miscellaneous:
  
• Operating Environment: "8% to 90% - Relative humidity (Rh), 28°C maximum wet bulb temperature, non-condensing | 10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 20°C/hr (36°F/hr). The upper limit and rate of change may be limited by the type and number of options installed. System performance during standard operating support may be reduced if operating above 30°C (86°F)."
• Industry Standard Compliance: "ACPI 6.1 Compliant, PCIe 3.0 Compliant, WOL Support, Microsoft® Logo certifications, PXE Support, USB 3.0 Compliant, USB 2.0 Compliant SMBIOS 3.1, UEFI 2.6 (Unified Extensible Firmware Interface Forum), Redfish API, IPMI 2.0, Secure Digital 4.0, TPM 1.2 and 2.0 support, Advanced Encryption Standard (AES), Triple Data Encryption Standard (3DES), SNMP v3, TLS 1.2, DMTF Systems Management Architecture for Server Hardware Command Line (SMASH CLP) Active Directory v1.0,ASHRAE A3/A4, Energy Star"
• Maximum BTU Rating: "1130 BTU per hr (at 115 VAC) 1126 BTU per hr (at 230 VAC)"
• Weight and Dimensions 7.9 kg | 17.41 lb - Hot Plug 4SFF fully loaded