ICR-4103-EU - Industrial 4G LTE Wi-Fi Router, with 2x Sim Slots (10-32VDC, -20~75°C)

The FRM220-NMC-R3 is a Network Management Controller card that can be placed in a compatible FRM220 series chassis to provide device management functions. The management interface supports a local RS-232 serial console or remote TCP/IP management by Telnet, HTTP and SNMPv1, v2c protocols and is designed to be hot swapped so that it may be field replaced without affecting any online service of any other rack cards. The card also supports online firmware upgrade from TFTP server, using any user interface, without affecting any other inserted line card's transmissions. Support for any standard NMS is provided by the included enterprise MIB file. CTC Union also provides and maintains our own EMS (Element Management System) which is a Java based client/server manager for monitoring and maintaining a large number of network elements over a long period of time.

Features:

• Supports multi-band connectivity with FDD 4G LTE/ TDD 4G LTE/ 3G WCDMA/2G GSM/ LTE Cat4
• 2 SIM card slots 4G LTE antenna, 1x WAN (10/100Base-TX) + 3x LAN (10/100Base-TX UTP), 2x DI + 1x DO, 3x Serial COM port (2x RS232, 1x RS485)
• Highly reliable and secure for mission-critical cellular communications
• Provide flexible options to configure LAN/ WAN ports
• Built-in dual SIM for network redundancy / failover/ roaming over/ back up
• Integrated dual detachable antenna against radio interference
• 4G LTE and WAN port for seamless connection and redundancy
• Supports 3x Serial port (1x RS485, 2x RS232) for IoT and automation application, Modbus RTU and Modbus/TCP gateway, MQTT
• Supports Routing/Firewall, NAT, Virtual Server, DMZ, Port filtering, MAC Filter, URL Filter, IP Filter, VLAN, Static Routing and RIP 1 & 2, VRRP, OSPF V2 & V3, BGP
• Supports VPN, OpenVPN, IPSec (3DES, AES128, AES196, AES256, MD5, SHA-1, SHA256), GRE, PPPTP, L2TP
• IPv6/IPv4 dual stack and all applications are IPv6 ready
• Supports DHCP server and client, PPPoE, Static IP, SNTP, DNS Proxy, DDNS, QoS, Virtual Com, UPnP
• Supports Alarm message : DO, SNMP Trap, E-mail
• Supports SNMP, TR069,Web, Telnet, CLI for management
• Supports dual Image firmware upgrade by Web
• CE, FCC, Rail Traffic EN50121-4 certified
• Safety EN60950-1 certified
• Radio RED ETSI EN301 489-1/-19/-52, EN301 908-1, EN303 413, NCC certified
• Heavy industrial grade EMS, EMI, EN61000-6-2, EN61000-6-4 certified
• Rugged metal, IP30 protection & Fanless design
• Wide operating temperature -20 ~ 75°C

Description:

• Standard: Cellular MobilComm standard: (Please see order information for optional band) 4G LTE: FDD-LTE, TDD-LTE 3G: WCDMA 2G: GSM/EDGE IEEE 802.3 10Base-T 10Mbit/s Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.1Q Virtual LANs (VLAN) IEEE 802.3x Flow control for Full Duplex
• Connector: Cellular MobilComm and WAN: Built-in dual SIM card slots for network redundancy / failover/ roaming over/ back up 2 SMA (female) connector for Antenna (Please see ordering information for optional accessories) 1x 10/100Base-TX RJ45 for WAN port LAN: 3x 10/100Base-TX RJ45 Serial: 1x RS485 and 2x RS232 (one of RS232 could be configured for console) Programmable DI/DO: 2xDI and 1x DO
• LTE Data Rate: Cat 4 ,Max download 150Mbps, Max upload 50 Mbps
• Removable terminal block: Provides for Power input, DO, DI1, DI2, COM2 (RS232), COM3 (RS485)
• Power Supply: Input 10-32VDC removable terminal block
• Power Consumption: <7W
• LED: System status (Green) VPN (Green), SIM 1 (Green), SIM 2 (Green) Cell signal Strong / Weak: H/L (Green)
• DIP SW for RS485 port: DIP 1 Pull Low : OFF: Disable, ON: Enable DIP 2 Pull High : OFF: Disable, ON: Enable DIP 3 120 ohm terminal resistor : OFF: Disable, ON: Enable
• Alarm message: DO for alarm message, with current capacity of 500mA/50VDC maximum SNMP trap, E-mail, SMS, Alarm trigger by DI, VPN or WAN disconnection
• Operation Temperature: 20~75°C
  
• Operating Humidity: 5% to 95% (Non-condensing)
• Storage Temperature: -40 ~ 85°C
• Housing Dimensions: 106 x 62.5 x 135mm
• Weight: 0.74kg
  
• Installation: Mounting : DIN Rail mounting or Wall mounting (Optional)