0
Your Cart
Digitus DK-1511-020 - UTP Cat5e Patch Cord 2m, PVC
Brand: Digitus
The 5e Class D patch cord is manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 5e specifications. It will guarantee the installed cabling system is compliant with the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS® Category 5e cabling. The performance is tested up to 100 MHz inclusive performance characteristics such as near end cross talk. This patch cord is designed and produced to fulfill the highest requirements of various application areas in full volume. Each cable is fitted with a molded boot which comes with kink protection and strain relief.
Features:
- 2x RJ45 (8P8C) connectors
- Boots with kink protection, strain relief and latch protection
- Length marking on boot
- Conductor: Cu (Copper)
- Shielding: U/UTP (unshielded)
- Structure: 4x 2 AWG 26/7, twisted pair
- Sheath: PVC
- PoE ready
- Conductor Stranded: AWG 26/7 bare copper, 0.145 ± 0.005 mm
- Insulations: HD-PE (High Density Polyethylene)
- Outer sheath: PVC
- Overall diameter: 4.6 mm ± 0.30 mm
- RJ45 connector: 3 μ nominal gold flash over 60 μ nickel undercoat contact pins
- Wiring standard: EIA/TIA 568B
- Durability: 750 insertion cycles
- Contact resistance: 30 mΩ maximum
- Resistance unbalance: 5% maximum
- Dielectric strength: 2500 VDC for 3 seconds
- Uninsulated resistance: 150 MΩ/km minimum
- Operating temperature: -20 °C up to +60 °C
- NVP: 69%