0
Your Cart
Eaton 9E 3000i - 3kVA/2.4kW Online UPS
Brand: Eaton
The Eaton 9E UPS constantly monitors power conditions and regulates voltage and frequency due to the online double conversion topology. You can get clear information on the UPS’ status and measurements (load level, battery level, input/output voltage and frequency) on a single screen with the new LCD interface and easily communicate with the UPS through USB, RS232 serial or over the network with the optional network card (Network-M2). The internal bypass allows service continuity in case of an internal fault. A maintenance bypass is also available as standard for easy maintenance of the UPS without powering down critical systems.
Features:
- Rating (VA/W): 3kVA/2.4kW
- Format: Tower
- Technology: Online double conversion
- Input voltage: 208/220/230/240V
- Output voltage/THDU: 208V*/220V/230V/240V ±1%, THDU: <2%
- Noise level: <37 dB @ typical load
- UPS Dimensions (mm): 399 x 330 x 190
- UPS Weight (kg): 24.2
- Warranty: 2 years
TECHNICAL SPECIFICATIONS
- Rating (VA/W): 3kVA/2.4kW
- Format: Tower
Electrical Characteristics
- Technology: Online double conversion
- Input voltage: 208/220/230/240V
- Input voltage range without using batteries: 176-300V without derating (up to 100-300V with derating)
- Output voltage/THDU: 208V*/220V/230V/240V ±1%, THDU: <2%
- Input frequency range: 40Hz-70Hz, 50/60 Hz autoselection
- Efficiency: Up to 91% in Online mode
- Overload capacity: 105%-130% : 60s, 130%-150% : 10s, >150% : ≥ 300ms
Connections
- Input: IEC C20
- Outputs: 6 x IEC C13 + 1 x IEC C19
Typical backup times at 50% and 75% load**
- 9E: 13/7 min
- 9E + 1 EBM: 49/32 min
- 9E + 4 EBM: 173/110 min
Communication
- Communication ports: 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously
- Communication slot: 1 slot for Network M2, ModBus-MS or Relay-MS cards
- Software: Eaton IPM Editions Software
Operating conditions, Standards and Approvals
- Operating temperature: 0 to 40°C
- Noise level: <37 dB @ typical load
- Safety: IEC/EN 62040-1
- EMC, Performance: IEC/EN 62040-2
- Approvals: CE, CB report (TUV) / EAC
Dimensions D x H x W / Weight
- UPS Dimensions (mm): 399 x 330 x 190
- UPS Weight (kg): 24.2
- EBM dimensions (mm): 399 x 330 x 190
- EBM weight (kg): 35.8
- UPS with supercharger (and no batteries) dimensions (mm): 399 x 330 x 190
- UPS with supercharger (and no batteries) weight (kg): 7.9
Customer Service & Support
- Warranty: 2 years
PART NUMBERS
- UPS: 9E3000I
- EBM: 9EEBM72
- UPS with supercharger (and no batteries): 9E3000IXL
- Options: Network-M2, ModBus-MS or Relay-MS cards